Product Specifications

	nuRF 2401AP	nuRF 2402AP
Radio Frequency	2.4 Ghz with dual transceivers handling up to 252 channels each	2.4 Ghz with single transceiver handling up to 19 channels each
MCU	32-bit RISC ARM	32-bit RISC ARM
Antenna	2 x 50 ohms SMA connectors: 1/2 wave whip - Open to higher gain antennas	2 x 50 ohms SMA connectors: 1/2 wave whip - Open to higher gain antennas
Connection Options	Power over Ethernet (IEEE 802.3af), Ethernet LAN (IEEE 802.3), USB, RS232, UART	Power over Ethernet (IEEE 802.3af), Ethernet LAN (IEEE 802.3), USB, RS232, UART
Power Supply	6V @ 1A DC Jack or USB or POE (Power over Ethernet)	6V @ 1A DC Jack or USB or POE (Power over Ethernet)
Casing	IP57 ABS casing: 150mm x 200mm x 54mm Bare Board: 113mm x 79mm x 13mm Intrinsically Safe (IS), Explosion Proof (ATEX), or other custom packages are available	IP57 metal casing: 120mm x 90mm x 28mm Bare Board: 113mm x 79mm x 13mm Intrinsically Safe (IS), Explosion Proof (ATEX), or other custom packages are available

nuRF 2401MR
Radio Frequency	2.4 Ghz with single transceiver handling up to 252 channels each FCC Part 15c compliant
MCU	8-bit 8051
Operational Mode	Customizable firmware supports: Receiver (RX), Transceiver (TX) for two way tags
Antenna	1 x 50 ohms SMA connectors: 1/2 wave whip - Open to higher gain antennas
Connection Options	USB Type A, Mini USB / Micro USB via converter Serial / UART
Power Supply	35mA peak current @ 5V DC (via USB)
Casing	IP57 ABS casing: 79mm x 50mm x 18mm Not including antenna

 

nuRF 2401EXT (Extender Series)
Radio Frequency	2.4 Ghz with dual transceivers handling up to 252 channels each FCC Part 15c compliant
MCU	8-bit 8051
Operational Mode	Customizable firmware supports: AP Relay AP Diversity Network Bridge
Antenna	OdBi Optimally tuned PCB antenna
Reception Distance	Up to 30 meters
Power Supply	50mA peak current @ 3V DC
Casing	IP57 ABS casing: 79mm x 50mm x 18mm Not including antenna